A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 6610-00-991-9453
NSN 6110-00-406-4767
NSN 5915-01-611-8724
NSN 6610-01-168-6943
NSN 5965-00-529-0602
NSN 5996-00-205-2701
NSN 5998-01-412-4271
NSN 6220-01-414-8926
NSN 6130-00-747-9714
NSN 5996-01-020-0567
NSN 5910-01-512-0626
NSN 6130-01-397-6144