One slot 1.187 in. Deep by 0.438 in. Wide with six holes 0.136 in. Dia
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.
Classification: Articles of plastics & articles of other materials of heading 3901 to 3914, nesoi
NSN 6135-01-130-3145
NSN 5950-01-633-4839
NSN 5915-01-206-7050
NSN 7035-01-245-9585
NSN 5945-00-153-6884
NSN 7035-00-153-3826
NSN 6130-01-408-4657
NSN 5910-00-195-7105
NSN 6220-01-447-6800
NSN 5895-01-660-9903
NSN 6685-00-216-6676
NSN 5990-01-105-5336