Second end bore 0.094 inch diameter, 0.084 inch deep, counterbore 0.152 inch diameter, 0.188 inch deep
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see axle(1), shouldered. For items not having any of the above conditions see pin, shoulder, headless. Excludes shaft(1), straight; and axle(1), straight.
Classification: Transmission shafts and cranks, except camshafts and crankshafts
NSN 5990-01-294-6198
NSN 6145-00-148-5748
NSN 6320-01-506-9439
NSN 6105-00-988-9903
NSN 5950-01-222-9277
NSN 6110-01-139-2918
NSN 6650-01-421-6957
NSN 6150-01-104-6027
NSN 5975-01-355-9744
NSN 6240-00-531-2002
NSN 6130-00-583-9925
NSN 5960-01-182-3676