First inside corner chamfered 0.069 in.By 45 deg
An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. It is designed for applications involving moving (kinetic) loads. Except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. The thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). Excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. See also washer, flat and spacer, sleeve.
Classification: Thrust ball bearings
NSN 5945-01-377-9927
NSN 5895-00-250-2022
NSN 5996-01-514-5937
NSN 5985-00-636-4835
NSN 2925-01-653-6394
NSN 6150-00-335-7189
NSN 6220-01-581-8339
NSN 6320-01-111-0960
NSN 5998-01-486-1719
NSN 5945-00-676-1025
NSN 6645-00-160-0503
NSN 6105-01-437-6876