No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Gaskets,washers & other seals
NSN 5950-01-626-9937
NSN 5990-01-040-0193
NSN 6110-01-406-4492
NSN 5975-01-267-3479
NSN 6150-00-518-2743
NSN 5935-01-232-4489
NSN 7035-01-487-6481
NSN 5990-01-252-8175
NSN 5930-01-261-7893
NSN 6620-00-025-1889
NSN 5960-01-352-0451
NSN 6130-00-244-1406