Utilized on generator set, 150kw, gas turbine, tm5-6115-598-24p
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 6240-01-194-2206
NSN 6240-00-306-9562
NSN 6150-00-705-0302
NSN 6610-01-175-3485
NSN 5990-00-652-6578
NSN 5905-01-554-1100
NSN 6150-00-005-1791
NSN 6145-01-197-7469
NSN 5950-00-408-6150
NSN 5990-00-660-8885
NSN 6650-01-446-2025
NSN 6320-01-352-8084