Four bolt holes, 0.437 inch diameter, 0.500 inch from center of each hole to edge along width and length
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.
Classification: Other articles of copper, nesoi
NSN 6110-00-848-8236
NSN 5996-01-158-5197
NSN 5975-00-966-7706
NSN 4140-00-830-9515
NSN 5975-01-097-4705
NSN 4140-00-274-9638
NSN 6220-01-098-8171
NSN 5965-01-366-0598
NSN 6130-01-588-0909
NSN 5996-00-107-5357
NSN 7035-01-541-4216
NSN 6110-01-233-1532