No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Gaskets,washers & other seals
NSN 5975-00-435-5929
NSN 5935-00-174-2791
NSN 5930-01-481-3071
NSN 6685-00-278-9496
NSN 6685-01-634-0611
NSN 5930-01-087-1232
NSN 2925-00-096-5526
NSN 6240-00-141-6143
NSN 6240-00-422-1278
NSN 6135-01-378-2324
NSN 5925-01-253-1831
NSN 5930-01-502-9135