No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Gaskets,washers & other seals
NSN 5996-01-426-8531
NSN 5930-00-175-7622
NSN 4140-01-181-4485
NSN 5965-01-222-0166
NSN 5960-01-448-3497
NSN 5920-00-791-5446
NSN 5996-00-938-7072
NSN 5930-01-557-5982
NSN 6135-01-613-6284
NSN 6650-01-472-0143
NSN 5835-01-495-0595
NSN 4140-00-000-0082