No other part numbers with same form, fit, and function found.
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use disk, solid, plain. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see shim. For items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes gasket; insulator (as modified) and mounting pad, electrical-electronic component.
Classification: Articles of plastics & articles of other materials of heading 3901 to 3914, nesoi
NSN 5950-00-101-1600
NSN 5996-01-544-9731
NSN 6240-01-273-7426
NSN 5915-01-081-7102
NSN 5999-00-958-6759
NSN 7035-01-144-6408
NSN 6105-00-417-9707
NSN 6685-01-255-2253
NSN 6130-00-061-7486
NSN 5998-01-427-3776
NSN 6150-00-185-9995
NSN 5920-01-203-2033