No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 5855-01-546-9395
NSN 5920-01-224-7946
NSN 6610-00-504-2839
NSN 6240-01-210-2715
NSN 5925-01-611-2749
NSN 6685-01-229-7048
NSN 6320-00-139-1090
NSN 2925-01-224-1885
NSN 5945-00-044-5872
NSN 5985-01-359-8511
NSN 7035-01-150-6303
NSN 5996-01-040-9680