A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)
NSN 6240-00-832-6867
NSN 5999-00-125-7659
NSN 5935-01-176-1423
NSN 6240-00-099-8606
NSN 6145-01-529-4097
NSN 6685-00-679-1197
NSN 5999-01-261-2266
NSN 5910-01-054-3442
NSN 6220-01-435-6297
NSN 6145-01-503-8534
NSN 5915-01-324-3881
NSN 5930-01-452-2473