C-5 landing gear specific
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 6150-01-647-2381
NSN 6320-01-435-5991
NSN 5965-01-035-6842
NSN 5905-01-604-3892
NSN 5915-01-032-4475
NSN 5915-01-004-1641
NSN 5965-01-437-7417
NSN 6220-01-526-0767
NSN 6610-01-425-6960
NSN 5835-01-631-3940
NSN 5999-00-370-8705
NSN 6650-01-450-3158