A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.
Classification: Tube or pipe fittings of nickel
NSN 5925-01-118-6770
NSN 6620-00-124-9515
NSN 5998-00-114-1513
NSN 6685-00-177-6491
NSN 5905-00-611-6132
NSN 5855-00-149-0766
NSN 5920-01-238-9319
NSN 5950-01-645-4037
NSN 5985-00-873-3182
NSN 5945-01-299-7150
NSN 5998-01-145-4860
NSN 5998-01-226-6727