A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 5895-00-292-2872
NSN 4140-01-643-3391
NSN 6620-01-096-3723
NSN 6320-00-116-3658
NSN 5998-00-291-6818
NSN 6320-01-129-9656
NSN 5975-01-483-8726
NSN 5945-00-472-0323
NSN 5985-00-170-6768
NSN 5960-01-215-9232
NSN 5996-01-646-1264
NSN 5835-01-017-7486