No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Gaskets,washers & other seals
NSN 6645-01-657-9812
NSN 5835-01-140-9306
NSN 5999-00-328-2172
NSN 6320-01-087-5377
NSN 5996-01-247-2986
NSN 6130-01-014-8441
NSN 6620-00-411-4983
NSN 5895-01-589-5174
NSN 5996-01-046-4544
NSN 5855-01-180-5369
NSN 6220-00-477-5946
NSN 6130-01-273-1146