5/64 in. Shoulder under head, 1/16 in. Radius on shank, 0.010 in. By 45 degrees chamfer on shank end
An internally threaded item with a cylindrical and/or square, hexagonal, octagonal, or dodecagonal outer periphery (parallel to the threaded axis) a portion(s) of which may or may not be enlarged, forming a flange(s) and/or shoulder(s). Items not having an enlarged outer portion may be threaded, a part of the full length, or tapped from both ends. Items having an enlarged outer portion (flange(s) or shoulder(s)) may be threaded the full length, threaded a part of the full length, or tapped from both ends. Items tapped from both ends shall have either right-hand threads on both ends or left-hand threads on both ends. For items conforming to any of the above and having a length overall exceeding two times the largest outside diameter or width across flats, use post, electrical-mechanical equipment. For items with an outside contour that is the same the full length, having a continuous thread through its entire length, and the length does not exceed two times the diameter or width across the flats use nut (1), plain (as modified). Excludes nut (1), plain, cap. See also turnbuckle body.
Classification: Nuts of iron or steel
NSN 5910-01-028-0802
NSN 6150-01-356-2424
NSN 2925-01-462-1620
NSN 7035-01-358-5888
NSN 5920-00-913-0475
NSN 2925-01-523-3607
NSN 6620-01-480-3407
NSN 6610-00-753-2281
NSN 5965-00-468-3071
NSN 2925-00-265-7539
NSN 5910-00-009-7162
NSN 5910-01-561-2154