First end has a 0.066 in. Wide and 0.268 in. Length through slot; finish: passivate per qq-p-35, type 4
No other part numbers with same form, fit, and function found.
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see axle(1), shouldered. For items not having any of the above conditions see pin, shoulder, headless. Excludes shaft(1), straight; and axle(1), straight.
Classification: Transmission shafts and cranks, except camshafts and crankshafts
NSN 6130-01-163-8515
NSN 5935-01-524-2809
NSN 5920-00-816-4497
NSN 5975-00-428-1683
NSN 6240-01-388-2413
NSN 2925-01-206-7948
NSN 6320-01-039-5891
NSN 6610-01-011-7577
NSN 5960-01-365-8752
NSN 5999-01-628-2386
NSN 5985-01-383-7424
NSN 6650-01-542-0683