No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 5999-01-461-5470
NSN 6145-01-171-4011
NSN 5905-00-518-2666
NSN 5835-01-390-4667
NSN 6685-01-200-2284
NSN 2925-01-214-5333
NSN 5965-01-050-8447
NSN 5975-01-107-5884
NSN 5835-00-140-8646
NSN 5905-00-245-8016
NSN 6645-00-966-7794
NSN 6610-00-792-6878