A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 5996-00-925-1953
NSN 6650-01-193-2144
NSN 6135-01-074-8220
NSN 6150-01-214-0363
NSN 6130-00-704-1886
NSN 5960-01-558-7787
NSN 4140-01-322-8491
NSN 6220-01-596-8546
NSN 6130-00-959-5800
NSN 6685-01-029-3773
NSN 5965-01-459-4345
NSN 6650-00-195-7519