No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 6685-01-387-2944
NSN 5835-01-406-4066
NSN 6135-01-563-4445
NSN 5996-01-435-4889
NSN 5998-01-431-5839
NSN 6110-00-772-0093
NSN 4140-00-997-0670
NSN 4140-01-329-4836
NSN 5905-00-828-9712
NSN 6105-01-603-1497
NSN 6620-00-144-7201
NSN 6620-00-079-0311