A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 6135-00-182-7008
NSN 5975-01-448-9405
NSN 5925-00-188-3864
NSN 6620-01-617-3915
NSN 5996-01-476-7550
NSN 6130-00-023-3433
NSN 5920-00-140-8912
NSN 5990-00-633-7634
NSN 6145-01-246-3988
NSN 5996-01-358-2655
NSN 5990-01-294-6198
NSN 5855-00-233-2366