No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Gaskets,washers & other seals
NSN 5895-01-165-9396
NSN 5910-01-207-2703
NSN 6610-00-008-0217
NSN 5996-01-462-5332
NSN 6145-00-839-3369
NSN 6645-01-034-0469
NSN 6620-00-905-6590
NSN 5950-01-131-7416
NSN 5910-01-069-2690
NSN 5920-01-370-2731
NSN 6645-01-157-9080
NSN 5910-01-141-2715