A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 6685-01-380-0469
NSN 5960-01-614-8005
NSN 5935-00-287-9898
NSN 6220-00-633-7556
NSN 6650-01-541-0506
NSN 5835-00-707-6266
NSN 6145-01-473-1698
NSN 5990-01-168-6797
NSN 5985-00-403-4145
NSN 5915-01-154-9807
NSN 5965-01-468-8405
NSN 6220-00-151-5383