No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 6110-01-279-9754
NSN 6150-01-190-6898
NSN 5905-01-498-3968
NSN 5965-00-241-2521
NSN 4140-01-111-7416
NSN 5920-01-467-8001
NSN 6240-00-410-5979
NSN 7035-01-558-1117
NSN 5990-00-723-7419
NSN 5905-01-645-0009
NSN 6105-00-073-9392
NSN 5996-00-938-9877