Two slots 1.000 in. C to c and 1/4 in. From ea edge on center line of lg slot width 0.228 in. With open end in lg
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.
Classification: Other articles of copper, nesoi
NSN 5905-00-478-8053
NSN 2925-01-386-7392
NSN 6220-00-023-4344
NSN 5975-01-054-7123
NSN 5910-01-517-4050
NSN 5990-01-205-5937
NSN 5965-00-513-1352
NSN 6320-01-283-1300
NSN 6145-00-107-7913
NSN 5998-01-440-7568
NSN 6220-00-212-9098
NSN 6130-01-223-3366