No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Made-up articles of textile material, nesoi
NSN 5985-00-269-5388
NSN 5996-00-625-5410
NSN 5965-00-191-6788
NSN 6150-01-550-5044
NSN 5925-01-158-9799
NSN 6110-01-551-1129
NSN 5960-01-026-3505
NSN 5965-01-026-9865
NSN 5950-01-176-3632
NSN 6610-01-278-2446
NSN 5895-00-796-4823
NSN 6685-01-523-5624