Groove located at right angle of bolt holes 0.275 in. Min, 0.285 in.Max center of bolt holes to center of groove, 0.070 in. Min, 0.080 in. Maxradius of groove
No other part numbers with same form, fit, and function found.
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.
NSN 5985-01-326-6978
NSN 4140-01-370-4075
NSN 5915-00-851-7862
NSN 5930-01-369-5434
NSN 5920-00-276-8657
NSN 6685-01-610-1450
NSN 5990-01-318-2494
NSN 6105-01-107-7127
NSN 5895-00-939-3765
NSN 5935-01-018-4578
NSN 6220-01-552-8760
NSN 5960-01-477-9997