One 0.297 in. Min 0.307 in. Max hole located 2.371 in. Min 2.379 in. Max from aperture center to hole center
No other part numbers with same form, fit, and function found.
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.
Classification: Other articles of copper, nesoi
NSN 5835-01-432-1277
NSN 6645-01-155-6568
NSN 6220-01-078-1625
NSN 6645-01-340-4484
NSN 6220-01-510-3927
NSN 5990-00-840-6571
NSN 5915-01-469-6236
NSN 5855-00-455-6070
NSN 5975-00-166-9296
NSN 6610-00-466-3104
NSN 6130-01-430-2452
NSN 5895-00-208-7581