A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 5920-01-361-8835
NSN 5835-01-395-7976
NSN 5945-00-982-3720
NSN 6685-01-560-9449
NSN 5930-01-574-5474
NSN 2925-01-288-2091
NSN 5920-01-060-3177
NSN 5965-00-594-3115
NSN 6145-01-642-5017
NSN 6130-00-277-7321
NSN 6220-01-502-9451
NSN 5835-00-373-2671