A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 2925-00-766-1278
NSN 5975-01-202-1341
NSN 6620-01-324-6439
NSN 5990-01-069-8649
NSN 5920-00-444-2127
NSN 6150-01-505-0632
NSN 5915-01-090-1057
NSN 5996-00-248-7061
NSN 6105-01-140-2390
NSN 5910-01-133-3897
NSN 6110-01-444-3302
NSN 5975-01-548-9492