A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 6220-00-165-1509
NSN 5975-01-415-2357
NSN 5975-01-303-6772
NSN 5925-01-432-2731
NSN 5975-01-214-8980
NSN 5835-01-155-0786
NSN 5996-01-515-4431
NSN 6320-00-731-6134
NSN 6685-00-227-0212
NSN 5975-01-517-5237
NSN 5895-00-809-3362
NSN 5965-00-439-6287