Notch centered along one length, 0.035 in. Nom depth at 90.0 degrees angle. Beveled corners on opposite side
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use disk, solid, plain. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see shim. For items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes gasket; insulator (as modified) and mounting pad, electrical-electronic component.
Classification: Other articles of iron or steel not wire nesoi
NSN 5910-00-722-3187
NSN 6135-00-073-8939
NSN 5985-01-188-3875
NSN 6645-00-372-2618
NSN 5999-01-024-8217
NSN 6320-00-731-6134
NSN 5835-00-632-8621
NSN 2925-01-024-2662
NSN 5999-00-005-3847
NSN 5935-00-114-3100
NSN 6620-00-523-4973
NSN 5910-01-617-8409