No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Gaskets,washers & other seals
NSN 5905-01-199-9445
NSN 5999-00-221-4615
NSN 5996-01-541-3927
NSN 5920-00-420-3917
NSN 5895-01-359-5090
NSN 6150-01-156-6783
NSN 5950-01-093-6212
NSN 5910-01-403-2812
NSN 6610-01-510-2302
NSN 6135-01-582-5987
NSN 5895-00-009-9152
NSN 6685-01-415-0574