2 holes 0.156 in. Diameter and 2 holes 0.086 in. Dia; tapered at 1 end to 0.062 in. Wide
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.
Classification: Other articles of copper, nesoi
NSN 5910-01-472-8659
NSN 5895-01-378-8686
NSN 6620-00-693-7751
NSN 6145-01-366-4619
NSN 6220-00-678-9075
NSN 5895-01-067-0480
NSN 5990-00-327-4006
NSN 6130-01-299-7515
NSN 5855-00-832-9341
NSN 5996-01-595-4788
NSN 5999-01-323-7113
NSN 5910-01-496-3230