A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Other articles of leather or composition leather, nesoi
NSN 5915-00-514-2098
NSN 5895-01-588-1736
NSN 5855-01-218-3735
NSN 4140-01-024-9414
NSN 5985-00-754-0658
NSN 6110-00-574-6096
NSN 6645-00-825-5677
NSN 5935-01-522-2076
NSN 5835-01-572-6900
NSN 6650-01-399-8552
NSN 5855-00-237-4088
NSN 6150-00-429-6135