A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 5910-01-337-4826
NSN 5960-01-371-5494
NSN 5965-00-791-0964
NSN 5965-01-241-9865
NSN 5945-01-480-0930
NSN 6135-01-394-4160
NSN 5925-01-263-9592
NSN 6130-01-126-2032
NSN 6240-01-155-2959
NSN 6150-01-563-6694
NSN 7035-01-166-7857
NSN 5990-01-529-7307