Two 0.250 in.-20 n.C. Tapped holes 0.500 in. Deep on a 3.500 in. Bolt circle with the holes positioned opposite each other and forty five degrees from the attachment slots and also one 0.562 in.-18 n.F.Tapped hole 1.000 in. Deep located ninety degrees from the attachment slots and perpindicular to the gland face the hole center being 0.875 in. From the gland face edge the tapped hole has a 0.809 in. Min. Spotface at the top and a 0.186 in. Drilled through hole at the bottom the through hole being at a thirty degree angle to the tapped hole and leading to the body recess diameter
No other part numbers with same form, fit, and function found.
An item designed to fit over a packing gland by mating with a surface of a second part which together will retain into a narrow groove or confined space the packing, preformed or o-ring, or an item designed to fit over a rod or shaft, to mate with a stuffing box to confine packing material. It may function as a static or dynamic seal retainer with the packing located on, around, or in the centerline direction of the rod or shaft axis. It may have holes or joints for mounting, be threaded or unthreaded. See also packing nut and packing nut, stuffing tube.
Classification: Gaskets,washers & other seals
NSN 5998-00-823-4999
NSN 5985-01-363-5339
NSN 4140-01-148-4634
NSN 5935-01-039-5508
NSN 5990-01-185-9835
NSN 5965-00-564-4399
NSN 6105-01-435-4376
NSN 6685-01-381-0759
NSN 5905-00-125-2505
NSN 5915-01-188-6748
NSN 5990-00-226-7894
NSN 5999-00-226-7859