A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)
NSN 6685-00-319-8882
NSN 5915-01-545-6700
NSN 5905-00-830-9027
NSN 6685-00-334-0621
NSN 5998-01-014-6126
NSN 5950-01-586-0292
NSN 6150-00-934-1470
NSN 5835-00-606-7042
NSN 5950-00-370-1879
NSN 6645-00-126-0286
NSN 6145-00-959-5897
NSN 5895-01-050-8392