No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 5935-00-991-3615
NSN 5975-00-221-2555
NSN 5950-01-179-5368
NSN 6145-01-333-3813
NSN 5930-01-191-9740
NSN 5935-01-356-5867
NSN 6320-01-279-0343
NSN 5910-01-357-7010
NSN 5960-01-481-3722
NSN 5930-01-218-4690
NSN 6150-00-431-0116
NSN 6320-00-731-6134