Both bearing surfaces chamfered on od 0.010 in. To 0.015 in. By 45 deg
No other part numbers with same form, fit, and function found.
A washer of any peripheral shape having a centrally located hole. Both bearing surfaces are parallel and flat, but one or both of the bearing surfaces must be broken by a counterbore, countersink, or similarly shaped recess. The thickness must not exceed 25 per cent of the outside diameter or the largest outside dimension. The maximum limit of the tolerance or range applied to the thickness and/or largest outside dimension must be used to determine compliance. Excludes washer, concave, retainer, packing, and thrust type washers. See also spacer, sleeve; and spacer, stepped.
Classification: Washers other than lock washers, iron or steel
NSN 6105-00-707-5962
NSN 5895-01-463-8977
NSN 5910-00-177-6752
NSN 5915-01-025-1362
NSN 5895-01-186-6286
NSN 6110-00-683-1022
NSN 6150-01-614-6301
NSN 6105-00-611-2581
NSN 5999-01-508-2041
NSN 5950-01-442-0138
NSN 5975-00-543-1195
NSN 5996-01-076-7374