Clear to light blue tint
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 5975-01-057-1170
NSN 5985-01-586-9450
NSN 5945-01-541-6279
NSN 5998-01-032-3299
NSN 6240-01-264-2574
NSN 5960-01-263-1641
NSN 6150-01-258-5487
NSN 6105-01-215-4213
NSN 6110-01-036-4421
NSN 6105-00-904-7519
NSN 5965-01-131-7496
NSN 5835-00-450-0079