A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 5985-01-567-9890
NSN 5975-00-481-3681
NSN 6240-01-406-4042
NSN 5855-01-318-7663
NSN 7035-00-153-3826
NSN 5945-01-574-3734
NSN 5930-00-271-2382
NSN 5996-00-840-5246
NSN 6685-00-008-1923
NSN 5905-00-777-8834
NSN 5935-00-570-0329
NSN 5999-00-732-7067