No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Nonelectrical articles of graphite or carbon
NSN 5925-01-280-5451
NSN 5835-00-491-5822
NSN 6320-00-977-3930
NSN 5990-00-122-8698
NSN 6610-00-890-0254
NSN 6685-00-810-2370
NSN 5910-01-166-7880
NSN 5905-01-092-0967
NSN 6240-01-368-6248
NSN 5998-01-441-0068
NSN 5835-00-454-7239
NSN 7035-01-190-7332