A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 6620-01-423-0833
NSN 5835-01-447-2544
NSN 4140-01-051-0018
NSN 5895-01-243-7010
NSN 5960-01-597-6288
NSN 5915-01-068-3927
NSN 6220-01-255-6948
NSN 6645-01-117-6156
NSN 5945-01-225-9939
NSN 6135-00-519-1325
NSN 6220-01-242-9901
NSN 5895-00-205-0620