A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 5996-00-556-7708
NSN 5925-00-100-0102
NSN 5945-01-386-5505
NSN 6220-01-534-2782
NSN 5998-01-319-1956
NSN 6240-00-275-1950
NSN 6110-01-224-7910
NSN 5935-00-441-2357
NSN 5975-00-223-6613
NSN 5960-01-641-5493
NSN 6610-01-225-7242
NSN 5920-01-292-2570