Varnish finish
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Gaskets,washers & other seals
NSN 6105-00-099-8818
NSN 5998-00-938-0306
NSN 6150-01-091-8939
NSN 5945-00-597-5722
NSN 5998-01-577-3321
NSN 6220-01-190-6906
NSN 5855-00-149-0766
NSN 6620-01-458-8074
NSN 5960-01-094-5958
NSN 6110-00-213-8078
NSN 6220-01-537-0129
NSN 5960-01-353-3972