Chamfer bottom outside edge 0.050 in. Min, 0.070 in. Max by 43 degrees min, 47 degrees max
No other part numbers with same form, fit, and function found.
A washer of any peripheral shape having a centrally located hole. Both bearing surfaces are parallel and flat, but one or both of the bearing surfaces must be broken by a counterbore, countersink, or similarly shaped recess. The thickness must not exceed 25 per cent of the outside diameter or the largest outside dimension. The maximum limit of the tolerance or range applied to the thickness and/or largest outside dimension must be used to determine compliance. Excludes washer, concave, retainer, packing, and thrust type washers. See also spacer, sleeve; and spacer, stepped.
Classification: Washers other than lock washers, iron or steel
NSN 6130-00-596-9565
NSN 6135-01-187-4382
NSN 5965-01-406-4164
NSN 5945-01-532-1463
NSN 5998-01-556-3200
NSN 6145-01-288-9482
NSN 7035-01-121-0901
NSN 6150-01-140-0027
NSN 5998-01-429-9430
NSN 7035-00-096-9986
NSN 5985-01-415-1822
NSN 5998-01-578-6731