Flat washer, 3/8 in, m
No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 5930-01-370-6424
NSN 6130-01-204-0888
NSN 5905-01-301-4799
NSN 5915-00-857-3007
NSN 6130-01-583-9153
NSN 5905-01-055-6193
NSN 5915-01-285-7457
NSN 6130-01-530-7777
NSN 5835-00-003-0295
NSN 6145-01-032-3693
NSN 5920-01-140-1120
NSN 5915-01-098-7884