Flat washer, 1/2" mo
No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 2925-00-833-9466
NSN 6650-01-368-3286
NSN 5835-01-256-3166
NSN 6150-01-549-2931
NSN 5990-00-416-9831
NSN 6135-01-327-2092
NSN 5915-00-934-3446
NSN 6650-01-014-5990
NSN 5975-00-756-8311
NSN 5925-01-528-4970
NSN 2925-01-157-9204
NSN 6135-00-073-8939